[separator top=”-40″ bottom=”-40″]
Water proofing sealer paint – Hydro protection for plaster, concrete, tadelakt and lime paint.
Sealant aqueous phase to be applied before the implementation of polyurethane varnish finish HYDRO HYDRO CONCRETE CONCRETE SINGLE COMPONENT and BI-COMPONENT. Scope: All concrete surfaces polyurethane varnish before indoor and outdoor
BETON DECO MONO COMPOSANT
Polyurethane waterborne high solids: one-component product. HYDRO CONCRETE SINGLE COMPONENT is a mechanical and chemical protection of decorative concrete. Application: for decorative concrete sealer especially adapted for indoor and outdoor, for: Stairs, Walls, Floors Is any passage also used for the opening yachting interiors boat.
HYDRO BETON BI-COMPOSANT
Clear acrylic waterborne polyurethane crosslinking upscale with aliphatic polyisocyannates: bi-product composant.HYDRO CONCRETE BI-COMPONENT is a protection durability of decorative concrete but also of metal, wood, composites and cataphoresis. Application: Heavy duty and durable protection suitable for decorative concrete including: Countertops, Kitchens, Baths, Shower Trays, Soil very busy and outworks.
Water and oil repellent surface soils Anti -tasking and oil repellent walls is now the ideal product for the prevention of damage to all porous materials ( natural or reconstituted stone , concrete, cement , tiles and all porous materials).
Its waterproofing properties allow Anti -tasking oil- floors and walls to prevent and prevent water penetration into walls , floors, roofs, facades , and thus eliminate the adverse effects due to moisture ( infiltration, erosion , freeze-thaw cycle , forming mosses and lichens, efflorescence … ) . Stain-resistant walls and floors by its oil-and oil- stain quality resists penetration of all greasy stains (oil, fats , grease ) , air pollution . Stain-resistant walls and floors is a oil- repellent surface in aqueous phase without petroleum solvents and silicone . Invisible after drying, it does not alter the appearance or color of materials. The oil-repellent treatment keeps longer “look new ” materials by delaying aging.
HYDRO REP A L’EAU
Is an aqueous solution of potassium methylsiliconate, solventless. Used in concentrated form it gives mineral construction materials effective effect hydrofuge.Le product, once implemented, reacts with carbon dioxide in the air turning into polymethylsiliconate acid. It develops repellency about 24 hours after application.La most absorbent and porous mineral surfaces can be treated with: HYDRO-REP WATER. Natural stone, minerals and coatings of lime. Ceramic raw products (tiles, bricks, terracotta vases). Concrete, fiber cement panels. and drywall. Chemical barriers to lift moisture.
Is a waterproof solvant and breathable funds.
Properties of the wax: Plasticity: malleable at room temperature, melting point greater than 45°C – 113°F (differentiates waxes from fats and oils) Low-viscosity when melted (unlike many plastics). Hydrophobicity: wax is insoluble in water.
- SOLID WAX based on beeswax and carnauba
- GOLD BEESWAX
- GOLD DUCATO BEESWAX
- SILVER BEESWAX
- WAX ALUMINIUM
- White WAX stripper effect
- CARNAUBA WAX IN BLOOM
- YELLOW WAX narural
- SAPONIFIED-WAX (with water)
The CARNAUBA is a wax obtained from leaves of a palm tree in northeastern Brazil, the Copernicia prunifera. It generally comes in the form of yellow-brown chips, brittle, very fragrant. This wax is obtained by threshing Copernicia prunifera sheets, followed by refining and bleaching sometimes.
[tagline_box backgroundcolor=”#f5f5f5″ link=”https://terredumondedecor.com/contact” button=”Contact Us” title=”From construction to decoration or remodeling, we work with you, helping you find the right material for your project.” description=”Contact us for technical support or to find qualified artisan and applicators near you.”][/tagline_box]
[separator top=”-80″ bottom=”-80″]